Gas Measuring Instruments Familiarization Course (customizable in all gas instrument brands)
Gas measuring instruments familiarization course has been developed to provide training/knowledge in the following subjects: Hydrocarbons basic properties/Flammability diagram analysis and fire factors control, inert gas use, purging safe procedures, detailed analysis in the toxicity (Main toxic gases, Acute and chronic effects, PEL-OEL-TLV-TWA-STEL(15), Cargoes Material Safety Data Sheets (MSDS) analysis, Gas instruments use/operation/maintenance /inspection/calibration/and certification procedures for all brands of gas meters. Preparation for Vetting inspection.
Confined / Enclosed Space Entry
This course has been developed to provide all necessary information according to new regulations regarding "Enclosed/confined Spaces Entry" in order to set out the conditions for safe entry as well as the precautions to be taken while work is being carried out in enclosed spaces.
U.T.I Device Proper Use & Maintenance Training
This course provides a complete training for all types of UTI meters (Hermetic/MMC/Tanktech) –Calibration/Maintenance/Safe use and operation.
Hazardous Areas Measurements
Hazardous Areas measurements course has been developed to provide training/knowledge in the following subjects: Hydrocarbons properties/Saturated-Unsaturated HC-Isomers & polymerization/Flammability diagram analysis and fire factors control, inert gas use, purging safe procedures, Gas free atmosphere factors, Oxygen deficiency, Toxicity analysis, Cargoes Material Safety Data Sheets (MSDS) analysis.
Advanced Training in Explosion Protection
Advance training in Explosion protection includes all necessary information about:
-
International/ national regulation / standards on vessels
-
Introduction to hazardous areas
-
Explosion theory
-
Properties of gases I liquids / solvents (LNG/LPG)
-
Flash point, ignition temp, explosion limits LEl-UEL
-
Density, gas groups and Temp. class
-
Ignition sources, electrical arc, mechanical sparks, hot surface and static electricity. (ESD)
-
Classification of hazardous areas (Zones)
-
Methods of protection Ex d, Ex e, Ex p, Ex q, Ex 0, Ex ia, Ex ib, Ex m, Ex n, Ex s. . Certification / marking of Ex-equipment
-
Ex-motors with protections devices Ex d, Ex e, Ex n, Ex p
-
Earthing and bonding hazardous areas
-
Power system in hazardous areas
-
Intrinsically safe systems / instrumentation
-
Zenerbarrierer, isolators
-
Certification control of Ex loops
-
Ignition graphs ohm/inductive / capacitve
-
Gas detection sensors and meters / work permits
-
Maintenance / repair of Ex-equipment
Noise at Work (in accordance with the MLC 2006 requirements)
Are you responsible for assessing and managing noise risks at your workplace? This Noise at Work Training Course not only covers how to deal with your noise at work risk assessment but also provides advice on managing noise risks. This course is recognised by IOSH, the Chartered body for health and safety professionals, so you will be awarded a certificate upon successful completion of the course and exam.
What will be Covered?
- Physical characteristics of sound and noise
-
Terminology and units of measurment
-
Occupational noise risks
-
The Control of Noise at Work Regulations 2005
-
Noise exposure calculations
-
Sound level meters and noise assessment
-
PPE selection
-
Noise control techniques
-
Noise management and best practice
Volatile Organic Compounds (VOC) Management
NM-VOC (Benzene,Toluene,Xylene etc.) emission control options and monitoring and recording VOC releases during the Cargo operations and sea voyage. It will assist all officers engaged in cargo handling operations (referred to VOC approved management plan) relevant to VOC management.
Chemical Tankers Operation
Special knowledge in chemical tankers incudes all information about:
- Chemical cargoes (CH.17-18-19) IBC Code
-
Types of chemical vessels/Types of cargoes
-
Reactivities/chemical properties
-
P&A Manual
-
Pre-wash procedures /Wall washing test
-
Chemical cargoes loading/washing/discharging examples.
LPG / LNG – Ethylene Carriers Operation
Provided a complete training/familiarization in all types of LPG/LNG/Ethylene Carriers. After completing of this course an officer is able to take responsibility for cargo operations or handling of cargo on liquefied gas tankers/ethylene carriers.